 |
Woodcarving #1 - Sharpening Techniques - DVD
Bench side instruction on how to make a gouge do more than you may have thought possible. Chris starts with a new tool and thoughtfully walks you through all the steps of preparation to finally achieve that desired cutting. MorePrice: $32.50
|
Availability: In Stock
Type:
ISBN: 978-0-9809660-0-8
|
|
|
|
|
|
|
|
 |
Woodcarving #3 - Ornamental Carving - DVD
Over 2 hours of expert instruction in carving an attractive and adaptable leaf decoration. The 2 disk DVD also highlights holding and using woodcarving tools correctly and efficiently. Fundamentals woodcarving cuts: running stabbing, sliding and sweeping! MorePrice: $40.00
|
Availability: In Stock
Type:
ISBN: 978-0-9809660-1-5
|
|
|
|
|
 |
Mastering the Dovetail Saw - DVD
Bench side instruction on the proper use and care of your dovetail saws. After teaching hundreds of woodworkers to cut dovetails Rob shares his knowledge of how to use the saw to finish rather than "rough out" the parts of the joint. MorePrice: $25.00
|
Availability: In Stock
Type:
ISBN: 978-0-9809412-9-6
|
|
|
|
|
 |
Hand-Cut Dovetails - DVD
Bench-side instruction on cutting "through-dovetails", from tool selection to assembly. This is the DVD that started it all. With the continued success of "Hand-Cut Dovetails" Rob has gone on to make numerous instructional DVDs. His method and teaching tyle have helped thousands learn how to cut what many consider the crown jewel of woodworking, the dovetail. This DVD with its close up photography will teach you the nitty gritty of how it is done. Rob practices and teaches "saw cut to saw cut" joinery, using the sawn surface as the final surface. "Hand-Cut Dovetails is a precursor to "Advanced Hand-Cut Dovetails" and "Drawer Making". MorePrice: $25.00
|
Availability: In Stock
Type:
ISBN: 978-0-9809412-1-0
|
|
|
|
|
 |
Rough to Ready - DVD
Bench side instruction on dimension lumber from rough to smooth. Rob teaches how to get a great workout and a flat board to boot! While you may or may not wish to dimension all your lumber by hand, knowing how is a valuable skill for when power tools are not an option. Rob walks you through the importance of getting the first face flat so the reference face will be as accurate as needed. Using a collection of hand planes and demonstrating how to sharpen the less common ones. Rob takes a piece of rough Mahogany through the paces of becoming straight, flat and true on all six surfaces. Sweat guaranteed! MorePrice: $25.00
|
Availability: In Stock
Type:
ISBN: 978-0-9809412-4-1
|
|
|
|
|
